Dr Michael H Weber and team are developing innovative technology in bone grafts using 3-D printing technology and new materials
Photo Credit: RDI

Innovation in 3D printing and spinal bone grafts at Canada’s McGill University


A team led by McGill University’s Dr Michael H Weber, and Professor Jake Barralet, are developing a new technology with a 3D printer which seeks to create replicas of bone for spinal grafts..

The concept creates a bone-like replacement material in the exact shape of bone or bone segment which is to be removed.

Professor Barralet holds the Canada Research Chair in osteoinductive biomaterials.

Dr Weber is an assistant professor  in the McGill Department of Surgery and Orthapeadic Surgeon at the Montreal General Hospital, specializing in spinal surgery and talks about their innovative research

3D printing is already used in dentistry where a Scan is made of the tooth or crown to be replaced…. © RDI

The idea of 3-D printing is gaining ever increasing usage. Already becoming established in dentistry, surgeons and researchers like the McGill team are exploring new uses in bone grafting and medicinal targetted delivery. Although the basic principal is similar to use in dentistry, the McGill research is extremely more complex in materials, designs and application.

Professor Barralet, is developing new bio-ceramic based materials which mimic bone structures and which would promote actual bone to grow over the “scaffold” substrate. Because of the nature of the materials this promotes natural repair of damaged areas giving them back their original structure and strength.

The white cylinder is an example of a 3D printed calcium phosphate bone graft that was printed by the team’s collaborator Prof. Gbureck in Wurzburg, Germany. Prototypes like these are used to research ways to improve bone healing and look at the feasibility of patient specific grafts. © RDI

Using this technique would eliminate the need for other invasive surgeries to gather bone from elsewhere in the patient to use as a graft.

Dr Weber says often in cancer patients, there may be a tumour on the spine, or the cancer may spread to the spine from elsewhere in the body. As the lesions grow they weaken the bone and may press on the spinal cord or exiting nerve roots, causing additional pain or even paralysis in some cases.


and the scanned image sent to the printer which creates an exact copy of the part within minutes © RDI © RDI

The team is also working to use the material as an additional delivery platform for functional release of medication following the removal of cancerous sections of spinal bone.  This would place the medicinal release directly in the area required.

Current technology in spinal and other bone repair often involves metal cages, or rods and screws, which are extremely complicated and often result in other complications.

Because of the delicate nature of spinal repair technology and the multitude of problems presented by a variety of cancers and lesions, Dr Weber says much research remains to be done in a variety of interconnected fields.

These include the surgeries themselves and developing new techniques with and for this innovative concept, the materials to be used in creating bone-like substrates/scaffold, the printing technology, and the medicines and methods to incorporate them directly into the printed bone.

McGill’s Professor Jake Barralet holds the Canada Research Chair in osteoinductive biomaterials. © McGill Biomedical Lab

Nonetheless he says he and his colleagues are excited to be on the cutting edge of developing new clinical technology to ease patient suffering and improve quality of life.

He notes that as with any such research there can be no way of knowing when it might be developed into actual practice, but hopes that as they push ahead, it will be soon.

Categories: Health, Internet, Science and Technology

Do you want to report an error or a typo? Click here!

@*@ Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

 characters available

Note: By submitting your comments, you acknowledge that Radio Canada International has the right to reproduce, broadcast and publicize those comments or any part thereof in any manner whatsoever. Radio Canada International does not endorse any of the views posted. Your comments will be pre-moderated and published if they meet netiquette guidelines.

Netiquette »

When you express your personal opinion in an online forum, you must be as courteous as if you were speaking with someone face-to-face. Insults and personal attacks will not be tolerated. To disagree with an opinion, an idea or an event is one thing, but to show disrespect for other people is quite another. Great minds don’t always think alike—and that’s precisely what makes online dialogue so interesting and valuable.

Netiquette is the set of rules of conduct governing how you should behave when communicating via the Internet. Before you post a message to a blog or forum, it’s important to read and understand these rules. Otherwise, you may be banned from posting.

  1. RCInet.ca’s online forums are not anonymous. Users must register, and give their full name and place of residence, which are displayed alongside each of their comments. RCInet.ca reserves the right not to publish comments if there is any doubt as to the identity of their author.
  2. Assuming the identity of another person with intent to mislead or cause harm is a serious infraction that may result in the offender being banned.
  3. RCInet.ca’s online forums are open to everyone, without regard to age, ethnic origin, religion, gender or sexual orientation.
  4. Comments that are defamatory, hateful, racist, xenophobic, sexist, or that disparage an ethnic origin, religious affiliation or age group will not be published.
  5. In online speak, writing in ALL CAPS is considered yelling, and may be interpreted as aggressive behaviour, which is unpleasant for the people reading. Any message containing one or more words in all caps (except for initialisms and acronyms) will be rejected, as will any message containing one or more words in bold, italic or underlined characters.
  6. Use of vulgar, obscene or objectionable language is prohibited. Forums are public places and your comments could offend some users. People who use inappropriate language will be banned.
  7. Mutual respect is essential among users. Insulting, threatening or harassing another user is prohibited. You can express your disagreement with an idea without attacking anyone.
  8. Exchanging arguments and opposing views is a key component of healthy debate, but it should not turn into a dialogue or private discussion between two users who address each other without regard for the other participants. Messages of this type will not be posted.
  9. Radio Canada International publishes contents in five languages. The language used in the forums has to be the same as the contents we publish. The usage of other languages, with the exception of some words, is forbidden. Messages that are off-topic will not be published.
  10. Making repetitive posts disrupts the flow of discussions and will not be tolerated.
  11. Adding images or any other type of file to comments is forbidden. Including hyperlinks to other websites is allowed, as long as they comply with netiquette. Radio Canada International  is in no way responsible for the content of such sites, however.
  12. Copying and pasting text written by someone else, even if you credit the author, is unacceptable if that text makes up the majority of your comment.
  13. Posting any type of advertising or call to action, in any form, to Radio Canada International  forums is prohibited.
  14. All comments and other types of content are moderated before publication. Radio Canada International  reserves the right to refuse any comment for publication.
  15. Radio Canada International  reserves the right to close a forum at any time, without notice.
  16. Radio Canada International  reserves the right to amend this code of conduct (netiquette) at any time, without notice.
  17. By participating in its online forums, you allow Radio Canada International to publish your comments on the web for an indefinite time. This also implies that these messages will be indexed by Internet search engines.
  18. Radio Canada International has no obligation to remove your messages from the web if one day you request it. We invite you to carefully consider your comments and the consequences of their posting.


One comment on “Innovation in 3D printing and spinal bone grafts at Canada’s McGill University
  1. Avatar Jennifer James says:

    Please! My left cervical facet was damaged during a minimally invasive surgery and it causes me soooo much pain everyday. Isn’t there a way to print a replacement for it? It is a very small bone and it could attach. Please, fusion doesn’t guarantee a solution and it causes other problems?

    Thank you for your time,

    Jen James